手動操作： 防火卷簾門可以設計為手動操作，通過手搖把或拉繩等裝置，由人工進行開啟和關閉。這種方式適用于小型門或緊急情況下的手動操作。

Manual operation: The fireproof rolling shutter door can be designed for manual operation, which can be opened and closed manually through devices such as hand cranks or pull ropes. This method is suitable for manual operation of small doors or in emergency situations.

電動操作： 大多數防火卷簾門采用電動操作，配備電機和控制系統，通過按鈕、遙控器或自動感應器進行開啟和關閉。電動操作提供了更便捷、迅速的方式，適用于大型門或需要頻繁使用的場所。

Electric operation: Most fire-resistant rolling shutter doors are electrically operated and equipped with motors and control systems, which can be opened and closed through buttons, remote controls, or automatic sensors. Electric operation provides a more convenient and rapid way, suitable for large doors or places that require frequent use.

緊急手動開啟： 在緊急情況下，防火卷簾門通常設計有手動開啟裝置，例如手搖把、緊急開關或應急手柄，以便在電力故障或其他緊急情況下手動操作。

Emergency manual opening: In emergency situations, fireproof rolling shutter doors are usually designed with manual opening devices, such as hand cranks, emergency switches, or emergency handles, to be manually operated in case of power failure or other emergency situations.

火災自動觸發： 部分防火卷簾門配置有火災探測系統，當探測到火災信號時，門會自動觸發關閉，以防止火勢擴散。這種方式通常與建筑的火災自動滅火系統相協調使用。

Automatic fire triggering: Some fire-resistant rolling shutter doors are equipped with fire detection systems. When a fire signal is detected, the door will automatically trigger closure to prevent the spread of the fire. This method is usually coordinated with the automatic fire extinguishing system of buildings.

定時控制： 有些防火卷簾門可以設置定時開啟和關閉，根據需要預定每天的開啟和關閉時間，提高門的使用靈活性。

Timed control: Some fireproof rolling shutter doors can be set to open and close at a fixed time, and the daily opening and closing time can be scheduled as needed to improve the flexibility of the door's use.

具體采用哪種方式取決于建筑的用途、設計要求、規范以及業主的需求。在選擇防火卷簾門的開啟和關閉方式時，需要考慮到性、可靠性以及操作的便捷性。建議在設計和安裝階段咨詢的消防工程師或建筑設計師，以確保江蘇防火卷簾門的操作方式符合相關法規和標準，并能滿足實際需要。

The specific method used depends on the purpose of the building, design requirements, safety regulations, and the needs of the owner. When choosing the opening and closing method of fireproof rolling shutter doors, safety, reliability, and convenience of operation need to be considered. It is recommended to consult a professional fire engineer or architectural designer during the design and installation phase to ensure that the operation of Jiangsu fireproof rolling shutter doors complies with relevant regulations and standards, and can meet practical needs.